Joint Layout Schedule

Slab Parameters

Project / Pour Name

Customer

Job Name / Address

Slab Length (ft) *

Slab Width (ft) *

Slab Thickness (in) *

Preferred Max Joint Spacing (ft)

Leave blank for an automatic recommended layout.

Joint Layout Schedule

Slab

Size36'-0" × 24'-0"

Thickness4"

Area864 sq ft

Concrete volume10.67 cu yd

Spacing

Recommended planning range8'-0" to 12'-0"

Selected spacingapproximately 12'-0"

Saw Cuts Running North–South

12'-0" from the west edge
24'-0" from the west edge

Saw Cuts Running East–West

12'-0" from the north edge

Directions are relative to the layout orientation selected for this calculation.

Result

Panels6

Approximate panel size12'-0" × 12'-0"

Smallest panel12'-0" × 12'-0"

Largest panel12'-0" × 12'-0"

Individual joint lines3

Total saw-cut length84 LF

Largest aspect ratio1.00

StatusRecommended preliminary layout

Warnings & Notes

Note: Final layout should be verified against project specifications.

Summary

Recommended preliminary layout: use approximately 12-foot joint spacing. Install two joints running north–south at 12 and 24 feet from the west edge. Install one joint running east–west at 12 feet from the north edge. This produces six panels measuring approximately 12 feet by 12 feet, with an estimated total of 84 linear feet of saw cutting.

This joint layout is intended as a preliminary planning aid only. Final joint locations shall be determined by the contractor, project specifications, site conditions, and applicable industry guidance.